Old Spice

Well-known member
Joined
Jul 31, 2023
Threads
36
Messages
111
Reaction score
150
Location
NY
Vehicle(s)
X3 currently
Saw this topic being discussed in the Trailhunter snorkel/engine video thread and thought some clarification on the Trailhunter snorkel would be helpful.

The Trailhunter snorkel's main purpose isn't to increase water crossing wading depth but to prevent dust from reaching the engine's air filter. The snorkel does this by raising the air intake inlet position. The 4Runner's standard air intake inlet location is in the wheel well, which is a good place because the fender liner does a good job of keeping the wheel well area's air free of water/dirt (which prevents them from reaching the air intake inlet), but dust can reach everywhere, including wheel wells and then the air inlet.

Dust is a particular big issue when offroading, which is what the Trailhunter is built for. And that's why it has a snorkel with a higher air inlet - to help the engine access cleaner, dust-free air.

This is why some call the Trailhunter's snorkel a "Desert Air Intake Snorkel"

A true snorkel system for deep water wading depth would have a sealed engine airbox, which the Trailhunter doesn't.
 
Last edited:

kzrman

Well-known member
Joined
Apr 13, 2024
Threads
10
Messages
75
Reaction score
53
Location
Maine
Vehicle(s)
2018 4Runner TRD off-road
Saw this topic being discussed in the Trailhunter snorkel/engine video thread and thought some clarification on the Trailhunter snorkel would be helpful.

The Trailhunter snorkel's main purpose isn't to increase water crossing wading depth but to prevent dust from reaching the engine's air filter. The snorkel does this by raising the air intake inlet position. The 4Runner's standard air intake inlet location is in the wheel well, which is a good place because the fender liner does a good job of keeping the wheel well area's air free of water/dirt (which prevents them from reaching the air intake inlet), but dust can reach everywhere, including wheel wells and then the air inlet.

Dust is a particular big issue when offroading, which is what the Trailhunter is built for. And that's why it has a snorkel with a higher air inlet - to help the engine access cleaner, dust-free air.

This is why some call the Trailhunter's snorkel a "Desert Air Intake Snorkel"

A true snorkel system for deep water wading depth would have a sealed engine airbox, which the Trailhunter doesn't.
Even if you could seal the airbox I'm pretty sure that the EV part of the system wouldn't like fording depths.
 

mars001

Member
First Name
Mike
Joined
Nov 3, 2024
Threads
0
Messages
9
Reaction score
3
Location
California
Vehicle(s)
2003 4Runner SR5 4.7 V8
Even if you could seal the airbox I'm pretty sure that the EV part of the system wouldn't like fording depths.
True. But even without EV, the amount of electronics in the engine compartment and everywhere else aren't all waterproof. Having just a sealed snorkel doesn't instantly make a truck fording up to snorkel depth 😀
 

andim

Active member
Joined
Apr 10, 2024
Threads
0
Messages
36
Reaction score
33
Location
Boston
Vehicle(s)
2015 Cherokee Trailhawk
Just want to add the one of the limiting factors of wading depth is the rear axle vent opening. There are usually aftermarket solutions to raise that. But even then some other part becomes the limiting factor. I doubt you can easily increase the wading depth on a modern car.
 
 
Top